Are you contemplating getting rid of your antique piece of furniture that is made out of wood? It’s not hard to give your old wooden chair or table the new life it deserves by stripping the old finish , and then applying a new coat of color. This article will show you how to paint wooden furniture using a few simple steps for a smooth and smooth look. We have broken down the tutorial into two sections. The first step will show that you the steps to prep your surface and the second step, you will be taught how what to do with the painted.
Materials Needed
- Drop Cloth
- Sandpaper, Various Grits
- Spray-On Oil-Based Primer
- Oil-Based Paint
Tools Needed
- Scraper Tool
- Palm Sander
- Tack Cloth
- Nylon Bristle Brush
- Safety Gear
Prepare the Surface (Step 1)
Set up your furniture and your space prior to painting will help ensure a easy procedure. Utilize these guidelines to paint furniture an enjoyable task.
Remove the doors and drawers off
Remove the drawers, shelves, and any other hardware if you are planning to paint the interior. Repair any joints that are loose or damaged or damaged areas of putty. Sand dry putty with the aid of a 220-grit sponge.
Test for Lead
Before you begin, ensure that the coating you’re removing doesn’t contain lead. You can buy lead testing kits from local shops. These guidelines are only applicable to paint that is not positive for lead.
Clean loose paint
Scrape away any loose paint. Be careful and be sure to avoid scratching the wood placing it in a parallel to the wood, and applying the same pressure.
Sand and clear
If the surface already has a surface that is smooth, use the sanding sponge 220-grit. Clean them using a damp cloth. In the event that your surface appears rough you can use either a 180 or 220-grit sanding spongeand then clean them. You may require hand sanding to reach into the crevices in your furniture. Once you’re done, scrub your furniture with the Tack cloth to get rid of dust.
Mask off Areas
Make use of painter’s tape to cover the areas that you don’t want to paint, such as cabinet drawers, the inside cabinets, as well as hardware and hinges that aren’t able to remove.
Apply Primer
Use a spray primer to achieve smooth, uniform coverage. Choose a white primer with light-colored paint . You can also use the darker primer for darker-colored paint for uniform coverage. Begin by spraying the underside of the piece. Spray slowly and carefully to make a consistent pattern of spray to avoid drips and over-spray. Create an in-and-out motion that is in line with the natural lines of your furniture. Apply 2 to three coats of light coatings, and let for the primer’s drying between coats completely. Check the label on the primer as drying times differ.
Sand, if Needed
If the surface appears uneven after primer is dry it is possible to lightly smooth the surface using fine sandpaper. Then, wipe it clean with a tack cloth to get off any dust.
Painting the Wood Furniture (Step 2)
Enhance the look of your furniture, or even protect the furniture’s surface by applying paint. Apply the paint in the following manner.
Prepare the Work Area
Set up your workspace in a location that is away from bright sunlight or powerful winds. Be sure to have adequate airflow to carry away the fumes from painting. You should have enough space around the object you’re painting. Clean up any dust or other particles within the area where you’ll be applying the paint, specifically the lighting overhead and on the floor. Clear the air to prevent dust from settling on the newly painted surface. Then take care to clean off any dust that may have been deposited on the wood’s surface.
Modify the lighting
Use a an adjustable, portable light. The angle of the light is dependent on the surface you’ll be painting. The angle at which light is reflected produces shadows to help identify scratches, runs, or drips.
Paint the Furniture
The piece of art should be painted with smooth strokes, adhering to the natural lines of the artwork. Pick a top-quality bristle made from nylon to get the best outcomes. Additionally you should repeat the stroke several times to ensure an smooth surface. If you notice drips, move the brush across your area in order to stop drips, and smooth it out before moving forward. Apply between two and three light coats, and allow the paint to fully cool between coats. Review your label inside the bottle of paint because drying times vary according to the type of paint.
Apply Clear Coat
Polyurethane clear coats give an additional sheen layer to strengthen and protect the paint. Mix topcoats made of oil with water-based paint. Set the can 10 to 12 inches away spraying in a back and forth motion. Make sure to follow the lines that run with the curves of your furniture to spread the surface in a uniform manner. Once the initial coat is dry, it is recommended to lightly sand your surface with 200-grit or greater sandpaper for professional results prior to spraying the final coat.
Repair Flaws and Apply Additional Coats
When the first coat has dried, look over the surface of the paint to look for any drips or runs. After completely drying the paint, gently sand it in the event that you observe any roughness. If you see paint collecting on the sandpaper immediately, stop to stop paint globs from scratching the surface. Another alternative is to put a knife blade on the surface of paint close to the dried paint bump. Be sure to move it to the point that the blade cuts away the bump , but not damage the paint surrounding it. Then, apply a thin layer of color to cover the marks.
Dry it
Let your furniture fully cure in a warm, dry and ventilated space prior to use typically for 24 hours. Once you know how easy to paint wooden furniture you’ll be able to appreciate the value of every piece of furniture.